AS SHOWN: W711A Leighton Arm Chairs (2). Fabric: Tucson Ivory. Nail Trim: standard #9 in Black Silver (base). Finish: Langdon.
DIMENSIONS (inches)
Overall: W 24 D 26 H 38.5
Inside: W 18.5 D 20.5 H 18.5
Arm: H 24.5
Seat: H 20
Spectacular Regency style rectangular dining table with burl oak veneer and carved walnut openwork bases. Fine mother of pearl inlays to the apron and table top, and gadrooned edges with deep carving.
Dimensions (W x D x H)
102 ¼ x 51 ¼ x 30 inches
Walnut hunt table that folds out to reveal antique brass hinges and planked top. Seats: 6.
Dimensions (W x D x H)
63 x 15 ¾ x 32 ¼ inches
80W x 44D x 30H
French Roast finished table top with polished stainless steel base.
FINISH: Villa Cortina
WOOD: Cherry with Laurel Burl Veneer Hardwood Solids
48W x 76D x 30H
Three 18 inch leaves expand table to 130 inches
Villa Cortina finish
The Wethersfield Estate Rectangular Dining Table is strongly supported by three-legged bases on both ends and – with the leaf installed – extends to seat ten A crisp maple veneer inlay and cross grain white oak veneers define a pleasing border around the clipped-corner table top.
Dimensions:
87.13″W x 47″D x 30″H
The relaxed look of a cerused oak top paired with a colorful painted base and turned legs makes this table feel right at home.
Dimensions:
72″W x 44″D x 30″H
The Crawford Refractory Dining Table captures the spirit of Kincaid Furniture and our commitment to making an honest product using the best techniques available. More than just a beautiful piece of solid wood furniture, this unique table makes adding and removing leaves a simple one-person task. Two leaves self-store under the ends and can be extended to add four additional seats.
Height: 30
Width: 84
Length: 44
7511_7562_7533B_SET
Four 7511 Matrix Dining Chairs
20″ width, 21″ depth, 38″ height
Two 7562 Matrix Benches
48″ length, 21″ depth, 32.5″ height
7533B Matrix Table Base
28″ square, 29.5″ height
Shown in Platinum Finish
Shown with GL60SQ, 60″ square glass top with 1/2″ thickness and flat polished edge
Enjoy our bestselling Luca Chairs with this reinvention of the design featuring a back support with front and rear upholstery. Casters make the chairs even easier to maneuver. The Arte Dining Bases shines here with its symmetrical, v-shaped aesthetic.
Four 9911 DNA Dining Chairs
19″ width, 22″ depth, 37″ height
9933 DNA Table Base
36″ length, 23″ width, 30″ height
Shown with GL54, 54 in. round glass tabletop with 1/2 in. thickness and 1 in. beveled edge
Our spectacular DNA Dining Set features a wave like pattern of carefully angled rods that combine to make an eye-popping, dynamic aesthetic.
Accommodates six guests comfortably
Levelers
Distressed reclaimed wood
Finish: Medium Wood
Hooker Furniture utilizes a multiple-step finish process of up to 16 finish steps. This results in an unsurpassed clarity, depth and color richness and durability to our finishes. Through hand-craftsmanship such as rubbing and padding, our finishes feel as good as they look, with a smoothness that is delightful to the touch.
Sumptuous Elegant Luxury is a lifestyle category today and at Hooker we create LUXE looks with today’s astute consumer in mind. Epoque, Bardot, Avalon, and Bling are all luxurious collections with an opulent point of view….. and several of our luxury collections have become a gold standard, in particular the Bling bed is a popular style statement today.
Width 60″
Depth 60″
Height 30″
Pictured with: Sanctuary Upholstered Arm Chair 5603-75400-LTBR
The groundbreaking Rhapsody Collection brings together classic design elements, grand scale, and a relaxed rustic finish to create an impassioned marriage of casual opulence. Exuberant scale and serpentine shapes infuse the pieces with emotion, while timeless motifs like scrolls, rope twist molding, the acanthus leaf and fleur de lis anchor Rhapsody in old world charm. Building on the grand scale and classic European design is the defining element of the collection: a walnut-colored finish inspired by the natural yet rustic nature of reclaimed woods in beautiful patinas.
Width 88″
Depth 46″
Height 30″
Pictured with: Rhapsody Wood Back Arm Chair 5070-75401
Mason possesses streamlined elegance and dynamic lines. It features a swirling vortex of steel tubes that rise up to create a dramatic, sculptural column. Visually intriguing, this column supports a solid stainless steel disc, which is permanently bonded to the tempered ½” thick glass tabletop. Mason will easily coordinate with and complement any of our popular barstools. Steel base and column are available in your choice of any Elite powder-coat finish.
• 30ø x 40h
Shown with Carina Barstool 4018FSB-H
Airy and light, Mason scale for today’s smaller urban spaces. Mason features a swirling vortex of steel tubes that rise up to create a dramatic, sculptural column. Visually intriguing, this column supports a solid stainless steel disc, which is permanently bonded to the tempered ½” thick glass tabletop. Offered in two sizes, Mason will easily coordinate with and complement any of our popular dining chairs. Steel base and column are available in your choice of any Elite powder-coat finish.
Shown With 421 BC Bistro dining chair
• 36ø x 29.5h | 42ø x 29.5h
Three dramatically curved steel panels create a powerful, sculptural form to enhance your dining environment. These massive steel panels surge upward to grasp a solid stainless steel disc, which permanently bonded to the tempered ½” thick glass tabletop. You can choose to upgrade the shimmer and sparkle by selecting champagne plating for these panels— otherwise, the panels and base are available in your choice of any two Elite powder-coat finishes. Offered in 48” and 54” round, Primo will easily coordinate with and complement any of our popular dining chairs.
• 48ø x 29.5h | 54ø x 29.5h
• Powder Coat or Champagne Plating
• Base Plate: Powder Coat ONLY
• Available in different sizes and shapes of glass top and height
• Interlocking of Steel uprights are available in Champagne plating or any Elite powder coat finish
• Base plate available in any Elite powder-coat finish
Design by Carl Muller
Shown with 407BC bistro chair
The boldly sculpted form of Hyper, a modern version of ancient arched portals, brings a powerful monolithic presence to your dining environment. Dramatically splayed and angled brushed stainless steel panels frame a continuous plane of walnut veneer that wraps the entire base. Tapering as it rises to the softly radiused shoulders and central span, the wood plane supports two solid stainless steel squares which are bonded to the generous ½” thick tempered glass top.
• 42d x 80w x 29h
• Walnut Veneer
Shown with 4021 dining chair
The strong geometry of Victor’s boldly tapered chevron-shaped body, clad in striking panels of brushed stainless steel and rich walnut veneer, all converge to create a modern sophisticated dining environment. A generous reverse hourglass-shaped glass top further reinforces Victor’s refined geometrical presence. Two solid stainless steel billets securely anchor the 1/2” thick tempered glass top. The entire body appears to hover above an understated steel base, which is available in all Elite’s powder-coat finishes.
42d x 76 x 28.75h
or
44d x 86w x 28.75h.
The Beacon Pub Table captures your imagination with architectural sleek lines of sturdy sheets of structural metal and wood. The veneered walnut base, available in various finishes, adds a handsome touch to the structural elegance of this monolith inspired design. A glimmering stainless steel disc is permanently bonded to the 30 inch tempered glass top. Choose from various metal powder-coat finishes to capture your imagination.
• 30Ø x 39.75h
• 1/2″ clear tempered glass
• Walnut Veneer
Shown with 4012 Hydraulic Barstool
The Churchill Bar Cart is great-looking as well as practical. The Churchill’s carpet casters make it to move easily on any flooring material and can be put away quickly. When completely open, the Churchill bar cart transforms into a regular bar ready for entertainment, but can be stored away when the party is over. The metal frame and the intriguing diamond stitch pattern gives the Churchill a nostalgic look, which is the perfect place for an extra dry martini. The interior of the Churchill offers generous space of storage for wine glasses and your favorite wines. The metal frame is available in any Elite powder-coat finish. The Churchill bar cart is available in all our microfiber, leather and Ultrasuede®.
Design by Rick Lee
• 26d x 26w x 44.25h (close)
• 26d x 54.5w x 44.25h (open)
• 1/2″ tempered clear glass
• Assorted Fabrics/Leather
• On Casters
The commanding Tangent Square Dining Table will certainly be the center of attention in any room. Shimmering Champagne-plated arms curve gently upwards, grasping solid stainless steel discs that are permanently bonded to the generous glass top. Understated feet lift the massive base from the floor, while providing an extra metallic accent. Base is offered in Rift-cut Oak or Walnut Veneer, while steel feet are available in Topaz only. Clear ½” glass tops are tempered for strength and safety. Steel chair frames are available in any Elite durable powder-coat finish
• 60d x 60w x 29.5h
• Rift-Cut Oak or Walnut Veneer
• 1/2″ clear tempered glass
Exeter dining is a striking marriage of isometric tension and modern design. Incorporating self-equalizing ball bearing glides and either one or two self-storing butterfly leaves, Exeter can be ordered to seat up to twelve.
42″ W x 72/92/112″ L x 30″ H
Pictured with: KYOTO SIDECHAIR IN WALNUT 8-KYO-40-04
